H3C S5120-SI Series Configuration Manual page 684

To do...
Enter system view
Enter cluster view
Configure the destination MAC
address for cluster
management protocol packets
Configure the interval to send
MAC address negotiation
broadcast packets
When you configure the destination MAC address for cluster management protocol packets:
If the interval for sending MAC address negotiation broadcast packets is 0, the system
automatically sets it to 1 minute.
If the interval for sending MAC address negotiation broadcast packets is not 0, the interval remains
unchanged.
Cluster Member Management
You can manually add a candidate device to a cluster, or remove a member device from a cluster.
If a member device needs to be rebooted for software upgrade or configuration update, you can
remotely reboot it through the management device.
Adding a member device
To do...
Enter system view
Enter cluster view
Add a candidate device to the
cluster
Removing a member device
To do...
Enter system view
Enter cluster view
Remove a member device from
the cluster
Use the command...
system-view
cluster
cluster-mac mac-address
cluster-mac syn-interval
interval
Use the command...
system-view
cluster
add-member
[ member-number ]
mac-address mac-address
[ password password ]
Use the command...
system-view
cluster
delete-member
member-number
[ to-black-list ]
1-12
Remarks
—
—
Required
The destination MAC address
is 0180-C200-000A by default.
Optional
One minute by default.
Remarks
—
—
Required
Remarks
—
—
Required