Creating A Text Comment Table Template - FLIR E95 User Manual

17 Annotating images
6. For each row in the table, do the following:
• Push the navigation pad. This displays the predefined values.
• Push the navigation pad up/down to select a predefined value. Push the navigation
pad to confirm.
• Instead of selecting a predefined value, you can select the keyboard
enter other text by touching the screen.
Note Text entered by the keyboard will be saved to the text comment table tem-
plate. Next time you add a text comment table annotation, the entered text will be
displayed as a predefined value.
7. When completed, select Save & Exit at the bottom of the table. Push the navigation
pad to confirm.

17.3.3 Creating a text comment table template

17.3.3.1 General
You can create a text comment table template in different ways:
• Using FLIR Tools/Tools+, see section 17.3.3.2 Creating a table template using FLIR
Tools/Tools+, page 85.
• Manually creating a text comment file (*.tcf), see section 17.3.3.3 Manually creating a
table template, page 86.
17.3.3.2 Creating a table template using FLIR Tools/Tools+
17.3.3.2.1 General
In FLIR Tools/Tools+, you can create text annotation templates on the Templates tab.
These templates can either be transferred to the camera or used as a template during
post-analysis in the program.
17.3.3.2.2 Procedure
Follow this procedure:
1. Click the Templates tab.
2. Click the Add new text annotations template toolbar button.
3. Create a name for the template.
4. Enter the desired fields and values. See the image below for examples.
5. Save the template.
6. Do one of the following:
• To use the template in the camera, connect a camera to FLIR Tools/Tools+ and
transfer the template to the camera.
• To use the template during post-analysis in FLIR Tools/Tools+, double-click an im-
age, and then click Import from template under Text annotations in the right pane.
#T810190; r. AI/41890/41890; en-US
icon and
85