Creating Files For Image Descriptions - FLIR ThermaCAM BX320 User Manual

8 – Tutorials
8.5
Follow this procedure to create a text file where any value of the first label will be used
as an image description:
Step
1
2
3
4
5
8
6
➲ For information about how to connect the camera to your computer, see the Ther-
maCAM™ QuickView user's manual.
62

Creating files for image descriptions

Action
Using any ASCII text editor (Notepad, Wordpad etc), type the first label within
brackets:
<Recommendation>
On the next lines, type the values you want to use, but this time without brackets:
Check connections
Check cables
Check gaskets
Check mountings
The final result should look like this:
<Recommendation>
Check connections
Check cables
Check gaskets
Check mountings
Save the file to Desktop, using any file name you want.
Rename the file name extension to .tcf.
Connect the camera to your computer using ThermaCAM™ QuickView. This makes
your camera appear as a hard disk drive in Windows® Explorer.
Move the file from Desktop to your camera using a drag-and-drop operation.
Publ. No. 1558440 Rev. a156 – ENGLISH (EN) – February 28, 2006