Usb Configuration - HP photosmart 630 series User Manual

Repeat steps 1 and 2 until the correct date, time, and
date/time format are set.
NOTE
In the date/time format, mm=month, dd=day, and
yyyy=year.
3
Press the OK

USB configuration

In the Setup menu (see page 71), if
you press OK
highlighted, the
sub-menu displays. This sub-menu
determines how the camera is
recognized when connected to a
computer.
Digital Camera—Causes the computer to recognize the
camera as a digital camera using the Picture Transfer
Protocol (PTP) standard. This is the default setting on the
camera. Use this setting for unloading and sharing on a
Windows computer that has the HP Photo & Imaging
software installed on it.
Disk Drive—Causes the computer to recognize the camera
as a disk drive using the Mass Storage Device Class
(MSDC) standard. Use this setting for unloading and
sharing on a Macintosh computer, or on a Windows
computer that does not have the HP Photo & Imaging
software installed on it.
NOTE
You cannot use the
unload images to a computer running Windows 98
without having installed the HP Photo & Imaging software
on the computer.
Chapter 6: Using the setup menu
button when the proper values are entered.
when the USB
USB Configuration
option is
Disk Drive setting on the camera to
73