Usb Configuration - HP Photosmart R507 User Manual

USB Configuration

This setting determines how the camera is recognized when
connected to a computer.
1
In the Setup Menu
select USB.
2
In the USB Configuration
sub-menu, highlight one of these
two choices:
•
Digital
computer to recognize the camera
as a digital camera using the Picture Transfer Protocol (PTP)
standard. This is the default setting on the camera.
•
Disk Drive—Causes the computer to recognize the camera as a
disk drive using the Mass Storage Device Class (MSDC)
standard. Use this setting to transfer images to a computer that
does not have the HP Image Zone software installed on it (see
Transferring Images to a Computer without HP Image Zone
Software
Windows 98 computer that does not have the HP Image Zone
software installed on it.
3
Press Menu/OK
Menu.
The new setting remains in effect until it is changed again, even
when you turn the camera off.
Downloaded From camera-usermanual.com HP Manuals
106
(page 103),
Camera—Causes the
on page 114). This setting may not work with a
to save the setting and return to the
HP Photosmart R507/R607 User's Manual
Setup