HP photosmart 630 series User Manual page 82

Problem
The camera
does not take
a picture
when I press
the Shutter
button.
82
Possible cause
You did not
press the
Shutter button
hard enough.
The optional
memory card is
full.
The optional
memory card is
locked.
The flash is
recharging.
The camera is
set to Macro
Exposure Mode
in the Capture
menu, but the
focus is outside
the macro
(close-up)
range.
The camera is
still saving the
last picture you
took.
hp photosmart 630 series user's manual
Solution
Press the Shutter
way down.
Unload images from the camera
to your computer, then delete all
images on the memory card. Or
replace the card with a new one.
Switch the locking tab on the
memory card to the unlocked
position.
Wait until the flash has recharged
before taking another picture.
Re-focus the camera so that it is
within the macro (close-up)
range. (See the range for the
Macro setting in
mode on page 39.)
Wait a few seconds for the
camera to finish processing the
last image before taking another
picture.
button all the
Exposure