Using Focus Lock; Setting The Flash - HP photosmart 630 series User Manual

Using focus lock

Focus Lock allows you to focus on a subject that is not in the
center of the picture, or to capture action shots more quickly by
pre-focusing in the area where action will occur. You can also
use Focus Lock
contrast situations.
1
Center the subject for your picture within the circle in the
viewfinder or within the focus brackets in
Using the viewfinder
page 29.)
2
Press the Shutter
exposure.
3
Continue to hold the
re-frame or adjust your subject for proper positioning.
4
Press the Shutter

Setting the flash

NOTE
The flash does not work while recording video clips.
The Flash button lets you cycle
through the flash settings on the
camera. To change the flash setting,
press the Flash
screen appears on the Image
Display with the flash setting
highlighted. Continue to press the
Flash button until the flash setting you want is displayed in
the status screen.
Auto is the default flash setting. The flash setting resets to
A
Auto when you turn off the camera. The following table
describes the flash settings.
Chapter 2: Taking pictures and recording video clips
to help achieve focus in low lighting or low
on page 28 and
button halfway down to lock the focus and
Shutter
button all the way down to take the picture.
button. The status
Using live view
button halfway down while you
AF
Live View. (See
on
31