Usb Configuration - HP Photosmart M417 User Manual

USB Configuration

This setting determines how the camera is recognized when
connected to a computer.
1. In the Setup Menu (page 85),
select USB.
2. In the USB Configuration
sub-menu, highlight one of these
two choices:
• Digital Camera—Causes the
computer to recognize the
camera as a digital camera using the Picture Transfer
Protocol (PTP) standard. This is the default setting on
the camera.
• Disk Drive—Causes the computer to recognize the
camera as a disk drive using the Mass Storage Device
Class (MSDC) standard. Use this setting to transfer
images to a computer that does not have the
HP Image Zone software installed on it (see
Transferring Images to a Computer without HP Image
Zone Software on page 100). You may be unable to
use this setting with a Windows 98 computer that
does not have the HP Image Zone software installed
on it.
3. Press the
Setup Menu.
The new setting remains in effect until it is changed again,
even when you turn the camera off.
HP Photosmart M417/M517 User's Manual
90
button to save the setting and return to the