Resetting The Camera - HP photosmart 630 series User Manual

Resetting the camera

If your camera does not respond when you press any buttons,
use the Reset
1
Open the battery/memory card
door on the bottom of the
camera. The
inset square located behind the
memory card slot, as shown.
2
Press the straightened end of a
paper clip into the
until the switch is depressed,
then remove the paper clip. The
camera is reset.
3
Close the battery/memory card door. You may now use the
camera again.
86
switch to reset the camera:
Reset switch is the
Reset switch
hp photosmart 630 series user's manual