Toshiba E.Studio 55 Operator's Manual page 49

You can specify users or groups of users that are notified if a problem occurs when a print job
is sent to the printer. If the print server is servicing queues on multiple file servers, you must set
up a NOTIFY list for each file server. To set up NOTIFY, use the following procedures:
1 Start the PCONSOLE utility.
2 Select "Print Servers" in the "Available Option" menu.
When a message appears, press the [Enter] key.
3
Select print server in the "Print Server" menu.
4
5
Select "Printers" in the "Print Server Information" menu.
6
Select printer in the "Defined Printers" menu.
7
Select "Notification" in the "Printer XXXX Configuration" menu ( XXXXX the name
of the printer ).
8
Select server in "NetWare Server/Object to be Notified/Object Type/First/Next/
State", and then press the [Enter] key.
9
The Notify Intervals screen displays.
10
Select the user or user group from the Notify Candidates screen.
11
The Notify Intervals screen displays.
Enter a number for the First and Next intervals for notifying users about printer
12
problems and press Enter key.
The First interval is the number of seconds the network waits before it notifies users about a print job
problem.
The Next interval specifies how often in seconds users are notified.
Press the Esc key and save all changes.
13
Press the Esc key until you see the prompt to exit PCONSOLE. Select Yes and
14
then press the Enter key.
How to Set Up Notify
47