Toshiba E.Studio 55 Operator's Manual page 117
Digital plain paper copier
Hide thumbs
Also See for E.Studio 55:
- Operator's manual for copying functions (179 pages) ,
- Datasheet (3 pages) ,
- Operator's manual (122 pages)
Table of Contents
Advertisement
Enter the administrator password.
2
• Password is indicated by asterisks (
3
Click on SETUP.
• If you do not want to program, click on BACK. The display returns to showing the Administrator menu.
4
"Reset the Printer to Enable Setting" message is displayed.
5
Perform the Printer Reset.
• You can also make them valid by turning the machine power off and then on.
• When setting is performed, the Printer Reset via the TopAccess may not be carried out. In this case, the
reset can be made through the operation on the Control Panel (refer to the Printer Function) or by turning
the machine power off and then on.
Note:
If the data entered is found invalid, the item present just before the entry is reversed in
blue. Check if the data entered is correct and enter again.
).
115
Advertisement
Table of Contents
