Toshiba E.Studio 55 Operator's Manual page 24

Available Queues appears.
6
Select a created queue.
7
• Up to 10 queues can be selected. When more
than one queue are to be selected, the priority
must be decided in advance.
Enter the priority and press the Enter
8
key.
The queue is assigned.
9
• When assigning more than one queue, repeat
steps 5 through 9.
Press the Esc key six times.
10
When Exit PConsole appears, choose
11
Yes and press the Enter key.
SUPPLEMENTS:
If the printer has an IP address, set up NetWare 3.x using TopAccess. See "TopAccess (for Administrator)-
Network SETUP-NetWare SETUP".
If the printer does NOT have an IP address, set up NetWare 3.x using MAP. See "MAP-Install MAP", "MAP-
Start MAP", and "MAP-Setup NetWare at MAP".
22