Toshiba E.Studio 55 Operator's Manual page 46

Enter the priority and press the Enter
10
key.
11
The queue is assigned.
• When assigning more than one queue, repeat
steps 5 through 9.
12
Press the Esc key twice.
When Save
13
choose Yes and press the Enter key.
14
Press the Esc key four times.
When Exit? appears, choose Yes and
15
press the Enter key.
SUPPLEMENTS:
If the printer has an IP address, set up NetWare 4.x Bindery mode using TopAccess. See "Top Access (for
Administrator)-Network SETUP-NetWare SETUP".
If the printer does NOT have an IP address, set up NetWare 4.x Bindery mode using MAP. See "MAP-
Install MAP", "MAP-Start MAP", and "MAP-Setup NetWare at MAP".
44
Changes? appears,