Requirements - Toshiba E.Studio 55 Operator's Manual

Requirements

To use this machine with the Network Interface Card installed, the following hardware and
software are required.
Hardware
Be sure to use a right cable and network device for your network interface card.
• Token Ring
STP cable with the RJ-45 connector for Token Ring, or Token Ring cable with the D-Sub 9-pin
connector.
• 10BASE-2
10BASE-2 coaxial cable and BNC connector.
• 10BASE-T
UTP cable with the Category 3 or 5 RJ-45 connector.
• 100BASE-TX
STP cable with the Category 5 RJ-45 connector.
Network Requirements
This machine can be used in the following network requirements:
• IPX/SPX Network (NetWare)
Server
Client
Protocol
• Microsoft Network
Server
Client
Protocol
• AppleTalk (Ethernet)
Host
Protocol
To use the network utility included with this machine, the following requirements must be met.
• TopAccess
A computer that can be connected to this machine via TCP/IP.
Netscape Navigator 4.0, or later, or Internet Explorer 4.0, or later
• MAP
A computer that can be connected to this machine via IPX/SPX, and where TCP/IP is
installed.
Netscape Navigator 4.0 , or later, or Internet Explorer 4.0, or later
6
: Novell NetWare 3. x, 4. x, 5. x.
Either PCONSOLE included with NetWare or NetWare
Administrator must be available.
: A computer that can be used as a NetWare client.
: IPX/SPX
: Windows NT Server 4.0, Windows 2000 Server
: Windows 95, Windows 98, and Windows NT Workstation 4.0,
Windows 2000 Professional, Windows XP
: TCP/IP, IPX/SPX
: Mac OS 8.0, 8.5, 8.6, 9.0
: AppleTalk
Other