Front Panel I/O Functions - Vecow ECS-9000 User Manual

2.2 Front Panel I/O Functions

In Vecow ECS-9000 series family, all I/O connectors are located on front panel
and rear panel. Most of the general connections to computer device, such as
USB, LAN Jack, Display, DVI-D, Display Port and any additional storage, are
placed on the front panel.
2.2.1 Reset Tact Switch
Reset
SIM 1
WLAN
It is a hardware reset switch. Use this switch to reset the system without power
off the system. Press the Reset Switch for a few seconds, then reset will be
enabled.
2.2.2 Power Button
Reset
SIM 1
WLAN
The Power Button is a non-latched switch with dual color LED indication. It
indicates power status: S0, S3 and S5. More detail LED indications are listed as
follows:
LED Color Power Status
Solid Blue
Solid Orange
HDD
SIM 2
DP
1 2 3
SIM 3
CFast
PWR
HDD
SIM 2
DP
1 2 3
SIM 3
CFast
PWR
S0
S3, S5 Suspend to RAM, System off with standby power
DVI-D LAN 2 LAN 1
DVI-I
DVI-D LAN 2 LAN 1
DVI-I
System Status
System working
GETTING TO KNOW YOUR ECS-9000 29