Profiles; What Is A Profile; Section 4: Profiles - Laversab 6600 User Manual

Profiles are created in Microsoft Excel and downloaded into the 6600 through the COM1
port on your PC using the Hyperterminal program that is normally available on all PC's.

4.1 WHAT IS A PROFILE.

A profile is a set of up to 50 points that tell the 6600 what you would want it to do at each
point. Each point consists of 10 parameters: 1) Pt units, 2) Pt mode, 3) Pt target value, 4)
Ps1 units, 5) Ps1 mode, 6) Ps1 target value, 7) Rate target value, 8) Ps2 units, 9) Ps2 mode
and 10) Ps2 target value. These 10 parameters are defined by you in the Excel program.
A total of 15 such profiles can reside in the 6600 at any time. Each profile is identified by a
number between 1 to 15 and also a name which can have up to 12 characters. The profile
number and the name are also part of the profile that is created in Excel.
A typical profile named "Sample" is shown below as it would appear in Excel.
A B
1
2 Sample
3 knots Control
4 knots Control
5 knots Leak
6 knots Control
7 knots Control
8 knots Control
9 knots Control
10 knots Control
11 knots Control
12 knots Control
13 knots Control
knots Measure
14
15 END
Row 1 always says "Profile". This indicates to the 6600 that a profile is to follow.
Row 2 left cell shows the name of the profile. This profile is named "Sample". The name
can have up to 12 alphanumeric characters. This name will show up on the 4
6600 display when this profile is executed.
SECTION 4

PROFILES

C D E
3 0
100.0 Feet Control
200.0 Feet Control
200.0 Feet Control
100.0 Feet Control
200.0 Feet Control
300.0 Feet Control
100.0 Feet Control
100.0 Feet Leak
100.0 Feet Control
100.0 Feet Control
20.0 Feet Control
20.0 Feet Measure
H
F G
Profile
Dfin
0 6000
Dfin
0 6000
Dfin
0 6000
Dfin
1000 6000
Dfin
5000 6000
Dfin
10000 6000
Dfin
18000 6000
Dfin
18000 6000
Dfin
30000 6000
Dfin
50000 6000
Dfin
Ground 6000
Dfin
Ground 6000
48
I J
0.100
Control
0.100
Control
0.100
Control
0.200
Control
0.200
Control
0.200
Control
0.200
Control
0.200
Control
0.300
Control
0.300
Control
Control Ground
Measure Ground
th line of the