Function 1: View Limits; Function 2: Set Limits - Laversab 6600 User Manual

Once in the correct screen, select a number to go to the desired function. An explanation of
each of the functions is given below.
3.5.1 FUNCTION 1 : VIEW LIMITS
The 6600 checks both the Target values and the Actual values to determine if they are within
specific limits. These limits can be set by the user. To view these limits, you can press the
Function Select key and then choose Function 1 (View Limits) by pressing "1". The VIEW
LIMITS screen appears as shown below.
1. max. knots =
2. max. Dfin =
3. max. mach = 1.000
To exit from this screen, press CANCEL.
For an explanation of the limits please refer to the "Set Limits" function.

3.5.2 FUNCTION 2: SET LIMITS

To set the limits, press 2 on the Function Select screen. Access to the "Set Limits" screen is
protected by means of a password. Enter the password followed by the ENTER key on the
screen shown below.
Please enter password :
The correct password will take you into the "Set Limits" screen shown below.
1. max. knots =
2. max. Dfin =
3. max. mach = 1.000
VIEW LIMITS
500.0 4. max. feet =
3.0 5. min. feet
6. max. ft/min.=
SET LIMITS
SET LIMITS
500.0 4. max. feet =
3.0 5. min. feet
6. max. ft/min.=
42
50000
= -2000
6000
.
50000
= -2000
6000