Laversab 6600 User Manual page 19

The Ps2 UNITS key brings up the choices for Ps2 units onto the 4th line of the display. Use
CANCEL to exit this unit selection mode. Use the arrow keys to move between the choices.
Use the ENTER key to select a choice. There are eight Ps2 units to choose from.
For more information on Units Selection please refer to Section 3.2.3.
MODE SELECT KEYS :
These keys are used to select between one of three operating modes (Measure, Leak, Control).
Modes can be selected independently for the Ps1, Ps2 and Pt outputs. Pressing the Pt Mode,
Ps1 Mode or Ps2 Mode keys brings up the selection of modes for the corresponding output
onto the 4th line of the display. The desired selection can be chosen by moving the cursor
using the arrow keys and then pressing ENTER. The GO key will execute the entered
selection.
For more information on Mode Selection please refer to Section 3.2.4.
12