Operating
Operating mode 'Slave'
This setting is only relevant if the device is not controlled via a DMX controller and working as
slave in a master / slave configuration. Master and slave devices are connected to each other
via a DMX cable, the master device is in one of the operating modes 'Manual control', 'Fading',
'Automatic show' or 'Sound control'.
Press [MODE] repeatedly until 'SLAV' appears in the display and press [ENTER]. The slave device
now copies exactly the actions of the master device.
Wild Wash 132 LED RGB DMX, 132 LED White DMX, 648 LED RGB DMX,
648 LED White DMX
37