Stairville Wild Wash 132 LED RGB DMX User Manual page 30

Operating
Operating mode 'Manual con‐
trol' (RGB LED model versions)
30
This setting is only relevant if the device is not controlled via a DMX controller and not working
as slave in a master / slave configuration. In this mode, the intensity of the LEDs can be
adjusted per colour and a Strobe effect can be engaged.
Press [MODE] repeatedly until 'C1xx' appears in the display and press [ENTER]. Use [UP] and
[DOWN] to select the menu item 'C1xx' , 'C2xx' or 'C3xx' for brightness of the red, green or
blue LEDs or the menu item 'CFxx' for the Strobe effect and press [ENTER].
To adjust the Strobe effect, use [UP] and [DOWN] to select a value between 'CF01' (flash fre‐
quency approx. 1 Hz) and 'CF99' (flash frequency approx. 30 Hz) or 'CF00' (continuous light, no
Strobe effect) and press [ENTER].
LED floodlight