Stairville Wild Wash 132 LED RGB DMX User Manual page 35

Operating mode 'Fading' (RGB
LED model versions)
Operating mode 'Automatic
show' (white LED model ver‐
sions)
Wild Wash 132 LED RGB DMX, 132 LED White DMX, 648 LED RGB DMX,
This setting is only relevant if the device is not controlled via a DMX controller and not working
as slave in a master / slave configuration. In this mode, the LEDs gradually change between the
available colours at freely selectable speed, a Strobe effect can be engaged.
Press [MODE] repeatedly until 'FA00' appears in the display and press [ENTER]. Use [UP] and
[DOWN] to select the menu item 'FAxx' for the fading speed or the menu item 'FAxx' for the
Strobe effect and press [ENTER].
To adjust the fading speed, use [UP] and [DOWN] to select a value between 'FA01' (minimum
speed) and 'FA99' (maximum speed) or 'C100' and press [ENTER].
To adjust the Strobe effect, use [UP] and [DOWN] to select a value between 'FF01' (flash fre‐
quency approx. 1 Hz) and 'FF99' (flash frequency approx. 30 Hz) or 'FF00' (continuous light, no
Strobe effect) and press [ENTER].
This setting is only relevant if the device is not controlled via a DMX controller and not working
as slave in a master / slave configuration. In this mode, the LEDs will gradually fade in with a
freely selectable speed from blackout to maximum brightness and reverse, the Strobe effect is
automatically engaged in regular intervals.
Press [MODE] repeatedly until 'AUTO' appears in the display and press [ENTER]. For effect
speed, use [UP] and [DOWN] to select a value between 'AU00' (minimum speed) and 'AU99'
(maximum speed) and press [ENTER].
648 LED White DMX
Operating
35