Operating
Operating mode 'Fading' (white
LED model versions)
34
This setting is only relevant if the device is not controlled via a DMX controller and not working
as slave in a master / slave configuration. In this mode, the LEDs will gradually fade in with a
freely selectable speed from blackout to maximum brightness and reverse, a Strobe effect can
be engaged.
Press [MODE] repeatedly until 'FA00' appears in the display and press [ENTER]. Use [UP] and
[DOWN] to select the menu item 'FAxx' for the fading speed or the menu item 'FFxx' for the
Strobe effect and press [ENTER].
To adjust the fading speed, use [UP] and [DOWN] to select a value between 'FA01' (minimum
speed) and 'FA99' (maximum speed) and press [ENTER].
To adjust the Strobe effect, use [UP] and [DOWN] to select a value between 'FF01' (flash fre‐
quency approx. 1 Hz) and 'FF99' (flash frequency approx. 30 Hz) or 'FF00' (continuous light, no
Strobe effect) and press [ENTER].
LED floodlight