Stairville Wild Wash 132 LED RGB DMX User Manual page 36

Operating
Operating mode 'Automatic
show' (RGB LED model versions)
Operating mode 'Sound control'
36
This setting is only relevant if the device is not controlled via a DMX controller and not working
as slave in a master / slave configuration. In this mode, the LEDs gradually change at freely
selectable speed between the available colours, the Strobe effect is automatically engaged in
regular intervals.
Press [MODE] repeatedly until 'AUTO' appears in the display and press [ENTER]. For effect
speed, use [UP] and [DOWN] to select a value between 'AU00' (minimum speed) and 'AU99'
(maximum speed) and press [ENTER].
This setting is only relevant if the device is not controlled via a DMX controller and not working
as slave in a master / slave configuration. In this mode, the LEDs are controlled via the built-in
microphone.
Press [MODE] repeatedly until 'SOUN' appears in the display and press [ENTER]. For micro‐
phone sensitivity, use [UP] and [DOWN] to select a value between 'SO00' (minimum sensitivity)
and 'SO99' (maximum sensitivity) and press [ENTER].
LED floodlight