Stairville Wild Wash 132 LED RGB DMX User Manual page 33

Operating mode 'Automatic
colour change' (RGB LED model
versions)
Wild Wash 132 LED RGB DMX, 132 LED White DMX, 648 LED RGB DMX,
This setting is only relevant if the device is not controlled via a DMX controller and not working
as slave in a master / slave configuration. In this mode, the colours are changed at freely select‐
able speed, a Strobe effect can be engaged.
Press [MODE] repeatedly until 'JUxx' appears in the display and press [ENTER]. Use [UP] and
[DOWN] to select the menu item 'JUxx' for colour change speed or the menu item 'JFxx' for
the Strobe effect.
For colour change speed, use [UP] and [DOWN] to select a value between 'JU00' (minimum
speed) and 'JU99' (maximum speed) and press [ENTER].
To adjust the Strobe effect, use [UP] and [DOWN] to select a value between 'JF01' (flash fre‐
quency approx. 1 Hz) and 'JF99' (flash frequency approx. 30 Hz) or 'JF00' (continuous light, no
Strobe effect) and press [ENTER].
648 LED White DMX
Operating
33