Retainer/Bulkhead Disassembly - Jeep KJ 2005 Service Manual

KJ
4C RETAINER/BULKHEAD
DISASSEMBLY
(1) Remove the 2C piston Belleville spring snap-
ring (6) from the 4C retainer /bulkhead (13). (Fig. 69)
(2) Remove the 2C piston Belleville spring (5) from
the retainer/bulkhead (13). (Fig. 69)
(3) Remove the 2C piston (2) from the retainer/
bulkhead (13). Use 20 psi of air pressure to remove
the piston if necessary.
(4) Remove the 4C clutch snap-ring (7) from the
retainer/bulkhead (13). (Fig. 69)
(5) Remove the 4C clutch pack (3, 4, 8) from the
retainer/bulkhead (13). (Fig. 69)
(6) Using Spring Compressor 8250 (2) (Fig. 70)
and a suitable shop press (1), compress the 4C piston
1 - SEAL
2 - 2C PISTON
3 - PLATE
4 - DISC
5 - 2C BELLEVILLE SPRING
6 - SNAP-RING
7 - SNAP-RING (SELECT)
Fig. 69 4C Retainer/Bulkhead Components
AUTOMATIC TRANSMISSION - 545RFE
return spring (10) and remove the snap-ring (9). (Fig.
69)
(7) Remove the 4C piston return spring (10) (Fig.
69) and piston (12) from the retainer/bulkhead (13).
Use 20 psi of air pressure to remove the piston if nec-
essary.
8 - REACTION PLATE
9 - SNAP-RING
10 - RETURN SPRING
11 - SEAL
12 - 4C PISTON
13 - 4C RETAINER/BULKHEAD
21 - 219