Return Hose (Reservoir To The Cooler); Pressure / Return Hose Assembly - Diesel - Jeep KJ 2005 Service Manual

KJ
HOSES (Continued)
(5) Remove the serpentine belt (Refer to 7 - COOL-
ING/ACCESSORY
REMOVAL).
Fig. 17 RETURN HOSE TO COOLER
1 - MOUNTING BRACKETS
2 - FLUID COOLER
3 - PRESSURE SWITCH
4 - RETURN HOSE
(6) Remove the return hose (4) from the gear.
(7) Remove the return hose (4) at the cooler (2).
(8) Remove the return hose mounting bracket bolts
(1) from the front cradle. (Fig. 17)
(9) Remove the return hose from the vehicle.

RETURN HOSE (RESERVOIR TO THE COOLER)

(1) Siphon the power steering fluid from the reser-
voir.
(2) Remove the return hose from the pump reser-
voir.
(3) Remove the return hose at the cooler.
(4) Remove the return hose from the vehicle.
PRESSURE / RETURN HOSE ASSEMBLY -
DIESEL
(1) Siphon the power steering fluid from the reser-
voir.
(2) Remove the air box (Refer to 9 - ENGINE/AIR
INTAKE SYSTEM/AIR
REMOVAL).
(3) Remove the clutch fan (Refer to 7 - COOLING/
ENGINE/RADIATOR FAN - REMOVAL).
(4) Remove the fan shroud.
(5) Remove the front fascia (Refer to 13 - FRAME
& BUMPERS/BUMPERS/FRONT
REMOVAL).
(6) Remove the grille and reinforcement (Refer to
23 - BODY/EXTERIOR/GRILLE OPENING REIN-
FORCEMENT - REMOVAL).
DRIVE/DRIVE BELTS
CLEANER HOUSING
FASCIA
(7) Remove the pressure line at the pump (Fig.
- 20).
(8) Remove the return hose at the reservoir (Fig.
20).
(9) Remove the pressure line routing bracket bolts
behind the left headlight bucket (Fig. 18).
Fig. 18 HOSE BEHIND HEAD LAMP
1 - HOSE
2 - MOUNTING BRACKET
(10) Remove the pressure line mounting bracket at
the frame both right and left side (Fig. 19).
-
-
Fig. 19 MOUNTING BRACKET AT FRAME
1 - GEAR
2 - MOUNTING BRACKET
PUMP 19 - 33