Displaying The Cost Of The Call - Net2Phone Yap Jack Pro User Manual

Yap Jack Pro User's Guide – Chapter 6
1. When Yap Jack Pro * Ready * is displayed
on the LCD, press the Menu/Exit button.
2. Using the down ( ) button, move to the
>Advanced Setup menu option, and then
select it by pressing the OK button.
3. Press the OK button to select the
>Administration menu option.
4. Using the down ( ) button, move to the
>Display Setup menu option, and then select
it by pressing the OK button.
5. Press the OK button to select the >CallTime
Confirm menu option.
The CallTime Confirm selection field
displays.
6. Press the up ( ) button to display Yes and then
select it by pressing the OK button.
7. Press the Menu/Exit button until the LCD
displays Yap Jack Pro * Ready *.

Displaying the Cost of the Call

The Yap Jack Pro lets you choose whether or not you
would like the LCD to display the cost of the call while the
call is in progress.
To display the cost of the call:
1. When Yap Jack Pro * Ready * is displayed
on the LCD, press the Menu/Exit button.
2. Using the down ( ) button, move to the
>Advanced Setup menu option, and then
select it by pressing the OK button.
3. Press the OK button to select the
>Administration menu option.
4. Using the down ( ) button, move to the
>Display Setup menu option, and then select
it by pressing the OK button.
5. Using the down ( ) button, move to the >Cost
of Call menu option, and then select it by
pressing the OK button.
The Cost of Call selection field displays.
6. Use the up ( ) button to select Display.
77