Calling Other Net2Phone Devices; Disconnect Mode - Net2Phone Yap Jack Pro User Manual

Yap Jack Pro User's Guide – Chapter 3
4. When you have finished with your call, simply
hang up your telephone handset.
The LCD displays the message, Connected to
ISP, and the number of minutes remaining
before disconnect, and a receipt prints.
If you have set the call duration to display
after the call is completed, it will display on
the LCD, along with the message, "Press
Any Key." The time will remain on the LCD
until you press a key on the device. See
Displaying the Call Duration After the Call in
Chapter 6, Using Other Features.
5. To place another call, pick up your telephone
handset, and dial the telephone number.
The Yap Jack Pro will beep twice to confirm that
it is connected to the ISP and then proceeds to
connect your call automatically. At the end of
each call, another receipt prints.
6. If you want to disconnect from the ISP, press the
Menu/Exit button.

Calling Other Net2Phone Devices

Disconnect Mode

When you make a call in Disconnect mode, the Yap Jack
Pro disconnects from your ISP after each call.
To make a call to another Net2Phone device in
Disconnect mode:
1. Pick up your telephone handset, and listen for a
dial tone.
2. Press the @ button on your Yap Jack Pro.
You will hear a dial tone.
3. Using your telephone keypad, dial *72 and the
account number of the person you want to call.
If you need to delete a previously entered
number, you can back up and delete it by
pressing the left (
29
) button.