Placing A Test Call - Net2Phone Yap Jack Pro User Manual

Yap Jack Pro User's Guide – Chapter 2
All necessary settings are now complete and you are
ready to place your first call.
Although not required, it is recommended
that you have the Yap Jack Pro test the ISP
connection before you place your first call.
For more information, see Testing Your ISP
Connection in Chapter 6, Using Other
Features.

Placing a Test Call

Although not required, it is recommended that you place a
test call to confirm that the Yap Jack Pro can successfully
connect to the ISP and that the receipt printing feature is
functioning properly.
To make a test call in Disconnect mode:
1. Pick up your telephone handset, and listen for a
dial tone.
2. Press the @ button on your Yap Jack Pro.
You will hear a dial tone
3. Using your telephone keypad, dial a local
number.
If you need to delete a previously entered
number, you can back up and delete it by
pressing the
You will hear "Please hold while your call is being
connected." The LCD will display "Dialing ISP
1/3." Then, after a few seconds, your Yap Jack
Pro will place the call through your ISP. This
process will take some time, depending on how
long it takes to reach and connect to your ISP.
For all domestic calls within the US,
dial 1 + area code + 7-digit telephone
number.
If you are calling from outside the
US, dial 011 + country code + city
code + telephone number.
button.
18