Table of Contents
Advertisement
Yap Jack Pro User's Guide – Chapter 6
To change the frames per packet setting:
1.
When Yap Jack Pro * Ready * is displayed
on the LCD, press the Menu/Exit button.
2.
Using the down ( ) button, move to the
>Advanced Setup menu option, and press the
OK button.
3.
Using the down ( ) button, move to the
>Device Setup menu option, and press the OK
button.
4.
Using the down ( ) button, move to the
>Frames Per Pkt menu option, and press the
OK button.
The Frames Per Pkt selection field displays.
5.
Using the down ( ) and up ( ) buttons, select
the desired setting from the available options: 1,
2, or 3.
6.
To save your entry, press the OK button.
Getting Product Information
The Information feature provides the following information:
Firmware version number
Hardware serial number
This information is especially helpful when troubleshooting
product problems.
To view the firmware version:
1.
When Yap Jack Pro * Ready * is displayed
on the LCD, press the Menu/Exit button.
2.
Using the down ( ) button, move to the
>Information menu option, and then select it
by pressing the OK button.
3.
Select the >FW Version menu option by
pressing the OK button.
The firmware version number displays.
4.
To exit out of this field, press Menu/Exit.
To view the hardware serial number:
1.
When Yap Jack Pro * Ready * is displayed
on the LCD, press the Menu/Exit button.
81
Advertisement
Table of Contents
