Receiving A Call From Another Net2Phone Device - Net2Phone Yap Jack Pro User Manual

Yap Jack Pro User's Guide – Chapter 3
2. Use the down ( ) and up ( ) buttons to scroll
through the list of recently dialed numbers.
3. Navigate to the number you would like to redial,
then press the OK button to initiate the call.
If the Yap Jack Pro is still connected to the ISP,
the call will be made immediately. If it is
disconnected, it will dial the ISP first & then dial
the recently dialed number you selected.
Receiving a Call from another
Net2Phone Device
Yap Jack Pro devices can receive calls from other
Net2Phone devices if the callers dial *72 + your account
number. However, in order for you to receive a call on
your device, you must either set up the Accept Call feature
or be connected to your ISP in Stay Connected mode.
You can only receive one inbound call per Accept Call set
up.
If the device is in Stay Connected mode, it
will automatically be in Accept Call mode.
To receive an incoming call from another Net2Phone
device:
1. When Yap Jack Pro * Ready * is displayed
on the LCD, press the Menu/Exit button.
2. Press the down ( ) button until you see
>Accept Call on the LCD, and then select it by
pressing the OK button.
3. When >Accept Call is displayed, select it by
pressing the @ button.
The set up process will take some time,
depending on how long it takes to reach and
connect to your ISP. Accept Call
displays on the LCD.
4. When a call comes in, the device will beep, and
the LCD will display Pick Up Phone.
5. Pick up your telephone handset, and talk as
usual.
6. When you complete the call, you can set up the
device to accept another call by repeating the
steps above.
33
Waiting...