Placing A Call - Net2Phone MAX 4 Quick Start Manual

The Net2Phone MAX 4 allows you to handle accounts in either of two ways:
? ? Single Account Management - All your telephones can operate from a single
account number and PIN, or
? ? Multiple Account Management - You can have an individual account and PIN for
each telephone attached to your Net2Phone MAX 4.
Single Account Management
For single account management, proceed as follows:
1. In the box for Port #1 in the Account column, enter your account number.
2. In the PIN slot, enter your PIN.
3. Check the Use account for all ports checkbox.
4. If you wish to be able to receive incoming calls (from another Net2Phone device) on a
port, select its Y radio button in the Login column. When multiple ports are sharing a
single account, only one of the ports sharing the account may have the Y selected.
Multiple Account Management
For multiple account management, proceed as follows:
1. For each port that has a telephone attached, enter the account number and PIN you
intend to use with that telephone.
2. Make sure that Use account for all ports is NOT checked.
3. If you wish to be able to receive incoming calls on a port, select the Y radio button in
its Login column. When multiple ports are sharing a single account, only one of the
ports sharing the account may have the Y selected.
Note: To obtain additional accounts, go back to your reseller to have your account number
divided it into separate accounts and PINs.

Placing a Call

Placing a call to a destination within North America
Pick up a phone attached to the Net2Phone MAX 4 and dial 1+ the area code + the number
to be dialed, followed by pound (e.g., 12019876543#).
Placing a call to a destination outside North America
Pick up a phone attached to the Net2Phone MAX 4 and dial 011 + the country code + the city
code + the number to be dialed, followed by pound (e.g., 011981223456#).
Page 9