Fcc Information; Acta Fcc Part 68 Customer Information - HCL Yap Jack Plus User Manual

Yap Jack Plus User's Guide – Chapter 9
9
9

FCC Information

ACTA FCC Part 68 Customer
Information
This equipment complies with Part 68 of the FCC rules
and the requirements adopted by the ACTA. On the
bottom of this equipment is a label that contains, among
other information, a product identifier in the format
US:AAAEQ##TXXXX. If requested, this number must be
provided to the telephone company.
This equipment uses the following Universal Service Order
Codes ("USOC") jacks: RJ11.
A plug and jack used to connect this equipment to the
premises wiring and telephone network must comply with
the applicable FCC Part 68 rules and requirements
adopted by the ACTA. A compliant telephone cord and
modular plug is provided with this product. It is designed to
be connected to a compatible modular jack that is also
compliant. See installation instructions for details.
The REN is used to determine the number of devices that
may be connected to a telephone line. Excessive RENs on
a telephone line may result in the devices not ringing in
response to an incoming call. In most but not all areas, the
sum of RENs should not exceed five (5.0). To be certain of
the number of devices that may be connected to a line, as
determined by the total RENs, contact the local telephone
company. For products approved after July 23, 2001, the
REN for this product is part of the product identifier that
has the format US:AAAEQ##TXXXX. The digits
represented by ## are the REN without a decimal point
(e.g., 03 is a REN of 0.3).
If this equipment Yap Jack Plus YJP-01 causes harm to
the telephone network, the telephone company will notify
you in advance that temporary discontinuance of service
may be required. But if advance notice isn't practical, the
83