Setting A Dialing Prefix - HCL Yap Jack Plus User Manual

Yap Jack Plus User's Guide – Chapter 5
To display the cost of the call:

Setting a Dialing Prefix

If your phone line requires you to dial a prefix to access an
outside line (for example, some business phones require
that you dial a 9 to access an outside line), you can
designate that prefix by following these steps. If you do
not need to indicate a prefix, you can skip this section.
To specify the use of a dialing prefix:
1. When Yap Jack Plus * Ready * is
displayed on the LCD, press the Menu/Exit
button.
2. Using the down (?) button, move to the
>Advanced Setup menu option, and then
select it by pressing the OK button.
3. Press the OK button to select the
>Administration menu option.
4. Using the down (?) button, move to the
>Display Setup menu option, and then select
it by pressing the OK button.
5. Press the OK button to select the >Cost of
Call menu option.
The Cost of Call selection field displays.
6. Use the up (?) button to select Display.
7. Press the OK button to save the setting.
To view the cost of the call while the call is in
progress, press the OK button three times.
The call cost will display on the LCD.
1. When Yap Jack Plus
displayed on the LCD, press the Menu/Exit
button.
2. Select the >Basic Setup menu option by
pressing the OK button.
3. Using the down (?) button, move to the >ISP
Config menu option and press the OK button.
4. Using the down (?) button, move to the >Use
Dial Prefix menu option and press the OK
button.
The Use Dial Prefix entry field displays.
* Ready * is
64