Displaying The Call Duration; Displaying The Cost Of The Call - HCL Yap Jack Plus User Manual

Displaying the Call Duration

With the Yap Jack Plus, you can designate when to view
the duration of your call.
To select when to display the call duration:
7. When Yap Jack Plus * Ready * is
displayed on the LCD, press the Menu/Exit
button.
8. Using the down (?) button, move to the
>Advanced Setup menu option, and then
select it by pressing the OK button.
9. Press the OK button to select the
>Administration menu option.
10. Using the down (?) button, move to the
>Display Setup menu option, and then select
it by pressing the OK button.
11. Press the OK button to select the >Call
Duration menu option.
The Call Duration selection field displays.
12. Using the down (?) and up (?) buttons to view
the different options: During Call, After Call, and
Both.
13. Select the desired setting and press the OK
button to save the call duration setting.
To view the call duration:
1. If you selected to display the call duration during
the call and you have a call in progress, press the
OK button three times to display the call duration.
2. If you selected to display the call duration after
the call, the duration time will display on the LCD
after the call has concluded.
3. If you selected to display the call duration both
during and after the call, you can press the OK
button three times to display the duration while
the call is in progress, and the duration will also
display on the LCD once the call has concluded.

Displaying the Cost of the Call

The Yap Jack Plus lets you choose whether or not you
would like the LCD to display the cost of the call.
Yap Jack Plus User's Guide – Chapter 5
63