Receiving A Call From Another Net2Phone Device - HCL Yap Jack Plus User Manual

4. When you have finished with your call, simply
hang up your telephone handset.
The LCD displays Connected to ISP and the
number of minutes remaining before disconnect.
5. To place another call, pick up your telephone
handset, and dial the telephone number.
Your call will be connected automatically.
6. If you want to disconnect from the ISP, press the
Menu/Exit button.
Receiving a Call from another
Net2Phone Device
Starting with version 1.2, Yap Jack Plus devices can
receive calls from other Net2Phone devices if they dial *72
+ your account number. However, in order for you to
receive a call on your device, you must set up the Accept
Call feature. For version 1.2, you can only receive one
inbound call per Accept Call set up.
?? If your device does not have the
Accept Call feature (item 3 on the
main menu), please upgrade the
firmware to version 1.2 (or later)
using the remote Upgrade feature.
?? See the Getting Product Information
section of Chapter 5, Using Other
Features, to find out how to see
what firmware version you currently
have. See the Upgrading the Yap
Jack Plus Firmware section of
Chapter 5 for details on how to
upgrade your device.
You must be out of Stay Connected mode in
order for Accept Call mode to work properly.
To receive an incoming call from another Net2Phone
device:
1. When Yap Jack Plus * Ready * is
displayed on the LCD, press the Menu/Exit
button.
Yap Jack Plus User's Guide – Chapter 3
29