1. Manuals
  2. Brands
  3. HCL Manuals
  4. Cordless Telephone
  5. Yap Jack Plus
  6. User manual

HCL Yap Jack Plus User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual

Advertisement

Table of Contents
loading

Summary of Contents for HCL Yap Jack Plus

  • Page 2 All Rights Reserved The use, disclosure, modification, transfer or transmittal of this work for any purpose, in any form, or by any means, without the written permission from Net2Phone is strictly forbidden. Rev. 1.2.5, 2003 Disclaimer The content of this manual is subject to change without notice and should not be construed as a commitment by the distributor or Net2Phone.

  • Page 3: Table Of Contents

    Using this Guide..................8 Symbols .....................9 Yap Jack Plus Interface.................10 Getting Started..................11 Overview ....................11 Setting up your Yap Jack Plus .............11 Entering Net2Phone Account and ISP Information......12 Account Information...............13 ISP Information................14 Checking Advanced Setup Information..........16 Entering Your Contact Email Address ........17 Changing Your Telephone Dialing Mode ........18...
  • Page 4 Yap Jack Plus User’s Guide Configuring Your Device..............31 Overview....................31 LCD Menu System.................31 Basic Setup..................31 Advanced Setup................32 Accept Call ..................33 Upgrade...................33 Self Test...................33 Information..................33 Lock Menus..................34 Navigating the LCD Menu..............34 LCD Menu Flow................34 Using the Menu................35 Basic Setup.....................35 Navigating the Basic Setup Menu ..........37 Account Configuration Sub-Menu..........38...
  • Page 5 Yap Jack Plus User’s Guide Changing the Frames per Packet Setting..........67 Getting Product Information..............67 Testing your ISP Connection..............68 Upgrading the Yap Jack Plus Firmware ..........69 Resetting All Settings to Factory Default..........70 Entering Information ................71 Overview....................71 Using the Telephone Keypad...............71 Telephone Keypad Map..............72 Navigating the LCD Entry Fields............73...

  • Page 7: Welcome

    Yap Jack Plus is a dial-up voice over IP device that allows you to make inexpensive calls over the Internet using your own telephone. If you are currently an owner of a Yap Jack Plus, you’ll find the following enhancements: ?? LCD displays call duration/cost...

  • Page 8: Product Features

    (Highly recommended!) ?? Device-to-Device Calling—Save even more by calling friends, family members and co-workers who have a Yap Jack Plus or one of the following devices powered by Net2Phone: IP Phone, Linksys Voice Router, PRO, 2-Port Gateway, and MAX gateways.

  • Page 9: New Features And Functionality

    To disable the mute function, press @ again. ?? Custom Device Name—You can configure the Yap Jack Plus to display a custom name (up to 16 characters) on the LCD. The default message...
  • Page 10 DNS servers that the Yap Jack Plus utilizes after connecting to a dial-up service. By default, the Yap Jack Plus will attempt to use the DNS servers provided by the ISP. If the ISP does not provide DNS servers, it will use those entered in the Yap Jack Plus.

  • Page 11: User Interface Changes

    Yap Jack Plus User’s Guide – Chapter 1 If you have an older version of the Yap Jack Plus firmware, and you want to take advantage of these new features, you can upgrade remotely right from your device. See Getting Product Information in Chapter...
  • Page 12 Yap Jack Plus User’s Guide – Chapter 1 ? ? Custom Script Use Dial Prefix Dialing Prefix ISP Redial DNS 1 DNS 2 ? ? Connect Options ? ? Connection Time ?? Advanced Setup—This new main menu item (previously called Extended Configuration) now contains the following features and sub-menus: ? ? Administration—Enables you to select a...

  • Page 13: Package Contents

    Yap Jack Plus User’s Guide – Chapter 1 ? ? System—Enables you to enter or change device functionality—only as directed by technical support: DSMAP Beta Map Doorman 1 Doorman 2 Doorman Port Debug DNS Overwrite ?? Accept Call ?? Upgrade—Moved to the main menu for easier access.

  • Page 14: Using This Guide

    ?? Any conventional analog telephone ?? A telephone line wall jack ?? Local telephone company service Using this Guide This guide is for Yap Jack Plus users and describes how to use the device. Highlights include: For information on… Go to…...

  • Page 15: Symbols

    Yap Jack Plus User’s Guide – Chapter 1 Symbols Throughout the manual, you’ll see information highlighted for you with the following fun symbol icons: Symbol Represents Chapter Description Note Important...

  • Page 16: Yap Jack Plus Interface

    Yap Jack Plus User’s Guide – Chapter 1 Yap Jack Plus Interface The Yap Jack Plus interface consists of an LCD screen and five buttons. The picture below describes each interface element and its purpose. @ button: Press Down/left button:...

  • Page 17: Getting Started

    Yap Jack Plus User’s Guide – Chapter 2 Getting Started Overview To start using your Yap Jack Plus, you simply have to: Set up the device Enter ISP and Yap Jack Plus account information Check advanced setup information Test your ISP connection Once you finish the four steps above, you’ll be all set to...

  • Page 18: Entering Net2Phone Account And Isp Information

    One of the new features in Yap Jack Plus, version 1.2.5 is the ability to specify two different sets of ISP information: Primary ISP and Backup ISP. If you have two separate ISP accounts, you will be able to enter one account’s...

  • Page 19: Account Information

    Yap Jack Plus User’s Guide – Chapter 2 Please have all account information ready and be prepared to enter your: ?? Net2Phone account number ?? Net2Phone personal identification number (PIN) ?? ISP access telephone numbers for both your primary and backup ISPs...

  • Page 20: Isp Information

    Yap Jack Plus User’s Guide – Chapter 2 Using the down (?) button, select >PIN and press the OK button. The PIN entry field displays. Pick up your telephone handset, and, using your telephone keypad, enter the PIN associated with your account number.
  • Page 21 If you do not want to enter backup ISP information, press the Menu/Exit button three times to exit, and hang up your telephone handset. Yap Jack Plus * Ready * displays on the LCD. 14. Press the Menu/Exit button once to return to the ISP Config menu.

  • Page 22: Checking Advanced Setup Information

    24. To save your entry, press the OK button. 25. Press the Menu/Exit button four times to exit, and hang up your telephone handset. Yap Jack Plus * Ready * displays on the LCD. Checking Advanced Setup Information...

  • Page 23: Entering Your Contact Email Address

    To enter the @ sign, press the 1 key twice. To save your entry, press the OK button. Press the Menu/Exit button twice to exit out and hang up your telephone handset. Yap Jack Plus * Ready * displays on the LCD.

  • Page 24: Changing Your Telephone Dialing Mode

    If you don’t have the call waiting feature on your telephone line, then you don’t have to do anything. If you do have call waiting, then you must configure your Yap Jack Plus to block call waiting every time you place a call to your ISP.
  • Page 25 All necessary settings are now complete and you are ready to place your first call. Although not required, it is recommended that you have the Yap Jack Plus test the ISP connection before you place your first call. For more information, see Testing Your ISP Connection in Chapter 5, Using Other Features.
  • Page 26 Yap Jack Plus User’s Guide – Chapter 2...

  • Page 27: Yap Jack Plus Calling

    Yap Jack Plus User’s Guide – Chapter 3 Yap Jack Plus Calling Overview Placing calls using the Yap Jack Plus is almost as easy as placing a regular phone call—with added benefits. Not only can you call any telephone in the world, you can also...

  • Page 28: Calling Experience

    Call Information While your call is in progress, you can see the following types of information: ?? Telephone number called ?? Call status ?? Time left in your Yap Jack Plus account ?? Funds left in your Yap Jack Plus account...

  • Page 29: Telephone Number Called

    Yap Jack Plus User’s Guide – Chapter 3 ?? Call duration ?? Cost of call ?? Volume setting Telephone Number Called The telephone number of the person you called is displayed at all times on the top line of the LCD.

  • Page 30: Call Duration

    To make a call to a regular telephone in Disconnect mode: Pick up your telephone handset, and listen for a dial tone. Press the @ button on your Yap Jack Plus. Using your telephone keypad, dial the number of the person you want to call.
  • Page 31 When you have finished with your call, simply hang up your telephone handset. Yap Jack Plus * Ready * displays on the LCD. To place another call, pick up your telephone handset, and repeat the steps above.

  • Page 32: Stay Connected Mode

    Connected mode: Pick up your telephone handset, and listen for a dial tone. Press the @ button on your Yap Jack Plus. Using your telephone keypad, dial the number of the person you want to call. ?? For all domestic calls within the US, dial 1 + area code + 7-digit telephone number.

  • Page 33: Calling Other Net2Phone Devices

    Disconnect mode: Pick up your telephone handset, and listen for a dial tone. Press the @ button on your Yap Jack Plus. Using your telephone keypad, dial *72 and the account number of the person you want to call. If you need to delete a previously entered number, you can back up and delete it by pressing the left (? ) button.

  • Page 34: Stay Connected Mode

    When you have finished with your call, simply hang up your telephone handset. Yap Jack Plus * Ready * displays on the LCD. To place another call, pick up your telephone handset, and repeat the steps above.

  • Page 35: Receiving A Call From Another Net2Phone Device

    Menu/Exit button. Receiving a Call from another Net2Phone Device Starting with version 1.2, Yap Jack Plus devices can receive calls from other Net2Phone devices if they dial *72 + your account number. However, in order for you to receive a call on your device, you must set up the Accept Call feature.
  • Page 36 Yap Jack Plus User’s Guide – Chapter 3 Press the down (?) button until you see >Accept Call on the LCD, and then select it by pressing the OK button. When >Accept Call is displayed, select it by pressing the @ button.

  • Page 37: Configuring Your Device

    Yap Jack Plus User’s Guide – Chapter 4 Configuring Your Device Overview Configuring your Yap Jack Plus is quick and simple using the LCD display and your telephone handset. This chapter describes how to: ?? Use the LCD menu system...

  • Page 38: Advanced Setup

    Yap Jack Plus User’s Guide – Chapter 4 ?? ISP Configuration ? ? Primary ISP ISP Phone Number ISP User Name ISP Password ISP Access Type Custom Script ? ? Backup ISP ISP Phone Number ISP User Name ISP Password...

  • Page 39: Accept Call

    Yap Jack Plus User’s Guide – Chapter 4 ? ? Modem Country ? ? Dialing Mode ? ? Voice Headers ? ? Frames Per Packet ?? Contact Information ? ? Your Email ? ? Your Phone ? ? Allow Messages...

  • Page 40: Lock Menus

    Yap Jack Plus User’s Guide – Chapter 4 Lock Menus This menu option enables you to lock and unlock LCD menu access and set up a login password. Navigating the LCD Menu LCD Menu Flow The following flow diagram shows how you can navigate through the LCD Menu system.

  • Page 41: Using The Menu

    Yap Jack Plus User’s Guide – Chapter 4 Using the Menu To access the LCD Menu system: When Yap Jack Plus * Ready * is displayed on the LCD, press the Menu/Exit button. When >Basic Setup is displayed on the LCD, press the down (?) and up (?) buttons until you reach the menu you want.
  • Page 42 Yap Jack Plus User’s Guide – Chapter 4 Field Name Description Language Change the LCD and voice prompts from English to French or Spanish. Account Enter Net2Phone account Configuration information into the Yap (sub-menu) Jack Plus. ISP Configuration Enter dial-up information for...

  • Page 43: Navigating The Basic Setup Menu

    Yap Jack Plus User’s Guide – Chapter 4 Navigating the Basic Setup Menu Menu 1 Basic Setup Language Language (field name) (field selection) down/up Exit Sub-Menu Account Config down/up Exit Sub-Menu ISP Config down/up Connect Options Connect Options (field name)

  • Page 44: Account Configuration Sub-Menu

    Yap Jack Plus User’s Guide – Chapter 4 Account Configuration Sub-Menu Account Configuration enables you to enter the following Yap Jack Plus account information: Field Name Description Account Number Enter your Yap Jack Plus account number. Enter the personal identification number associated with your account number.

  • Page 45: Isp Configuration Sub-Menu

    Yap Jack Plus User’s Guide – Chapter 4 ISP Configuration Sub-Menu ISP Configuration enables you to enter the following dial- up information for your ISP: Field Name Description Primary ISP Enter dial-up information for (sub-menu) your primary ISP or primary access number.

  • Page 46: Navigating The Isp Configuration Sub-Menu

    Yap Jack Plus User’s Guide – Chapter 4 Navigating the ISP Configuration Sub-Menu The following flow diagram shows how you can navigate through the ISP Configuration sub-menu: Sub-menu ISP Config Sub-sub-menu Primary ISP down/up Sub-Sub-Menu Backup ISP down/up Use Dial Prefix...

  • Page 47: Primary Isp Sub-Menu

    Yap Jack Plus User’s Guide – Chapter 4 Primary ISP Sub-Menu Primary ISP enables you to enter dial-up information for your primary ISP. If you have only one ISP account, you can use these fields to store your account information and a primary access number for your ISP.
  • Page 48 Yap Jack Plus User’s Guide – Chapter 4 Field Name Description Custom Script This field is used to enter any special dialing/access instructions for certain ISPs. This field is supplemental to ISP Type selection 99 (as mentioned in ISP Access Type above).
  • Page 49 Yap Jack Plus User’s Guide – Chapter 4 ISP S AVIGATING THE RIMARY Sub-Sub-Menu Primary ISP ISP Phone Num. ISP Phone Num. (field name) (field entry) down/up Exit ISP User Name ISP User Name (field name) (field entry) down/up Exit...

  • Page 50: Backup Isp Sub-Menu

    Yap Jack Plus User’s Guide – Chapter 4 Backup ISP Sub-Menu Backup ISP enables you to enter dial-up information for your secondary ISP. If you have only one ISP account, you can use these fields to store your account information...

  • Page 51: Navigating The Backup Isp Sub-Menu

    Yap Jack Plus User’s Guide – Chapter 4 Navigating the Backup ISP Sub-Menu Sub-Sub-Menu Backup ISP ISP Phone Num. ISP Phone Num. (field name) (field entry) down/up Exit ISP User Name ISP User Name (field name) (field entry) down/up Exit...

  • Page 52: Advanced Setup

    Yap Jack Plus User’s Guide – Chapter 4 Advanced Setup The Advanced Setup menu provides you with the following configuration options: Field Name Description Administration Specify dialing and display (sub-menu) preferences, and change your password. Device Setup Enter connection options,...

  • Page 53: Navigating The Advanced Setup Menu

    Yap Jack Plus User’s Guide – Chapter 4 Navigating the Advanced Setup Menu Menu 2 Advanced Setup Sub-Menu Administration down/up Sub-Menu Exit Device Setup down/up Sub-Menu Contact Info down/up Sub-Menu System...

  • Page 54: Administration Sub-Menu

    Yap Jack Plus User’s Guide – Chapter 4 Administration Sub-Menu Administration enables you to configure the following Yap Jack Plus options: Field Name Description Dialing Setup Enter or select dialing (sub-menu) parameters. Display Setup Enter or select display (sub-menu) options.

  • Page 55: Dialing Setup Sub-Sub-Menu

    Yap Jack Plus User’s Guide – Chapter 4 Dialing Setup Sub-Sub-Menu Field Name Description Use Masked Dial Enables you to insert the international dialing prefix for the country you are in so that when you make an outgoing international call...
  • Page 56 Yap Jack Plus User’s Guide – Chapter 4 AVIGATING THE IALING ETUP Sub-Sub-Menu Dialing Setup Use Masked Dial Use Masked Dial Exit (field name) (field entry) down/up Exit Mask Dial Prefix Mask Dial Prefix (field name) (field entry) Exit...

  • Page 57: Display Setup Sub-Sub-Menu

    Yap Jack Plus User’s Guide – Chapter 4 Display Setup Sub-Sub-Menu Field Name Description Call Duration Specify when you would like the call duration to be available for display on the LCD. Options are During the Call, After the Call, or Both.
  • Page 58 Yap Jack Plus User’s Guide – Chapter 4 AVIGATING THE ISPLAY ETUP Sub-Sub-Menu Display Setup Call Duration Call Duration (field name) (field selection) Exit down/up Exit Cost of Call Cost of Call (field name) (field selection) down/up Exit Custom Name...

  • Page 59: Device Setup Sub-Menu

    Yap Jack Plus User’s Guide – Chapter 4 Device Setup Sub-Menu Device Setup enables you to configure the following Yap Jack Plus options: Field Name Description Call Waiting This field tells the device if you have the Call Waiting feature...
  • Page 60 Yap Jack Plus User’s Guide – Chapter 4 Field Name Description Dialing Mode Select Tone (touch-tone) or Pulse (rotary) for the dialing mode of your telephone. The default setting is Tone. Voice Headers Users can switch between N2P and RTP (default) voice headers, depending on Net2Phone network routing.

  • Page 61: Navigating The Device Setup Sub-Menu

    Yap Jack Plus User’s Guide – Chapter 4 Navigating the Device Setup Sub-Menu Sub-Menu Device Setup Call Waiting Call Waiting (field name) (field selection) down/up Exit C-W Enable Code C-W Enable Code (field name) (field entry) down/up Exit C-W Block Code...

  • Page 62: Contact Information Sub-Menu

    Yap Jack Plus User’s Guide – Chapter 4 Contact Information Sub-Menu Contact Information enables you to enter or select the following options: Field Name Description Your Email Using your telephone keypad, you can enter an email address that technical support will use to send...

  • Page 63: Navigating The Contact Information Sub-Menu

    Allow Messages (field name) (field selection) Exit System Sub-Menu The System sub-menu contains important communication settings for the Yap Jack Plus. You should not enter or change any information in these fields unless instructed to do so by technical support.

  • Page 64: Modem Country Codes

    Yap Jack Plus User’s Guide – Chapter 4 Modem Country Codes To set up your device with the appropriate modem settings, enter the country code for your country from the list below. The default is United States (1). If your country is not listed, then use the default setting.

  • Page 65: Using Other Features

    Yap Jack Plus User’s Guide – Chapter 5 Using Other Features Overview The Yap Jack Plus provides several other features: Information, Self Test, Upgrade, and Reset settings. This chapter describes how to: ?? Lock the menus ?? Change the display language...

  • Page 66: Testing Your Isp Connection

    Testing Your ISP Connection Although not required, it is recommended that you have the Yap Jack Plus test the ISP connection before you place your first call. To test your ISP connection: When Yap Jack Plus * Ready * is displayed on the LCD, press the Menu/Exit button.

  • Page 67: Changing The Display Language

    Yap Jack Plus User’s Guide – Chapter 5 Using the down (?) button, move to the >Self Test menu option, and then select it by pressing the OK button. The device will attempt to connect to your ISP access telephone number. If the connection is successful, Test Successful displays on the LCD.

  • Page 68: Adding A Custom Name

    To save your language setting, press the OK button. Adding a Custom Name You can customize the Yap Jack Plus to display a 16- character name on the LCD. Instead of the default name, Yap Jack Plus * Ready *, you can have the Yap Jack Plus display your name, your business name, etc.

  • Page 69: Displaying The Call Duration

    Yap Jack Plus User’s Guide – Chapter 5 Displaying the Call Duration With the Yap Jack Plus, you can designate when to view the duration of your call. To select when to display the call duration: When Yap Jack Plus * Ready * is displayed on the LCD, press the Menu/Exit button.

  • Page 70: Setting A Dialing Prefix

    Yap Jack Plus User’s Guide – Chapter 5 To display the cost of the call: When Yap Jack Plus * Ready * is displayed on the LCD, press the Menu/Exit button. Using the down (?) button, move to the >Advanced Setup menu option, and then select it by pressing the OK button.

  • Page 71: Using Masked Dialing

    Yap Jack Plus User’s Guide – Chapter 5 Use the up (?) button to select In Use. To save your entry, press the OK button. Using the down (?) button, move to the >Dialing Prefix menu option and press the OK button.

  • Page 72: Changing The Voice Headers Setting

    Yap Jack Plus User’s Guide – Chapter 5 country and press the OK button. For example: If the prefix for international dialing in your country is “00,” and you want to call the UK (Country Code 44), then you should enter “00”...

  • Page 73: Changing The Frames Per Packet Setting

    Yap Jack Plus User’s Guide – Chapter 5 Use the down (?) button to select N2P or the up (?) button to select RTP. To save your entry, press the OK button. Changing the Frames per Packet Setting If users encounter poor call quality because of bandwidth issues, the frames per packet setting can be changed to 1, 2 or 3.

  • Page 74: Testing Your Isp Connection

    To exit out of this field, press Menu/Exit. Testing your ISP Connection Although not required, it is recommended that you have the Yap Jack Plus test the ISP connection before you place your first call. To test your ISP connection:...

  • Page 75: Upgrading The Yap Jack Plus Firmware

    Yap Jack Plus User’s Guide – Chapter 5 connect three times and then displays an error message. Press Menu/Exit to conclude the test. If the ISP test is not successful, make sure that you’ve entered the following information correctly: ?? Account number...

  • Page 76: Resetting All Settings To Factory Default

    Press the @ key to restart the device. Resetting All Settings to Factory Default This feature enables you to clear your Yap Jack Plus of all previous settings and return to default settings. You only need to do this if you’re returning your device or if you want to start fresh with all new settings.

  • Page 77: Entering Information

    Yap Jack Plus User’s Guide – Chapter 6 Entering Information Overview Entering information into your Yap Jack Plus is easy once you understand how to use the telephone keypad. This chapter describes how to: ?? Use the telephone keypad ?? Navigate the LCD entry fields...

  • Page 78: Telephone Keypad Map

    Yap Jack Plus User’s Guide – Chapter 6 Telephone Keypad Map Use the following chart to help you determine which key to press and how many times to get a particular character or letter. Examples: To enter the @ sign, press the 1 key twice.

  • Page 79: Navigating The Lcd Entry Fields

    Menu/Exit button on your Yap Jack Plus. Scrolling (? ,? , ,? ) To scroll within a field, use the left (? ), right (? ), down (?), and up (? ) arrow buttons on your Yap Jack Plus.
  • Page 80 Yap Jack Plus User’s Guide – Chapter 6...

  • Page 81: Faqs

    Yap Jack Plus User’s Guide – Chapter 7 FAQs To aid in troubleshooting, please review these frequently asked questions. What do I do if I need to dial a 9 before the ISP dial-up number? To set the use of a dialing prefix, access the Basic Setup menu and go to ISP Config then Use Dial Prefix.
  • Page 82 2 times for the “@” symbol and 3 times for the “.” (period/dot) in the domain name. Can I use a fax machine with my YAP Jack Plus? No. You cannot use a fax machine with your Yap Jack Plus.
  • Page 83 Yap Jack Plus User’s Guide – Chapter 7 How do I dial a number with the Yap Jack Plus? There are two options: you can dial as though you are in the United States or you can use masked dialing. To call a number in New Jersey, for example, first press the @ button on the Yap Jack Plus, then dial 1-201-555-1212.
  • Page 84 Yap Jack Plus User’s Guide – Chapter 7 If the Yap Jack Plus does not work through a computer, then how do I set it up? The Yap Jack Plus is configured using a telephone keypad attached to the device and the LCD screen.
  • Page 85 Will there ever be any updates to the Yap Jack Plus? Sometimes the internal software (firmware) that runs the Yap Jack Plus is upgraded. You can upgrade easily via the Upgrade function in the main menu. Does the Yap Jack Plus work internationally?
  • Page 86 Yap Jack Plus User’s Guide – Chapter 9...

  • Page 87: Product Specifications

    Yap Jack Plus User’s Guide – Chapter 8 Product Specifications Model Yap Jack Plus: YJP-01 Standards and Protocols N2P: system control protocol PPP: standard connection to Internet provider TCP/IP: transmission control Internet provider Linux: operating system G.723.1. VAD/CNG: bandwidth saving algorithm...
  • Page 88 Yap Jack Plus User’s Guide – Chapter 9...

  • Page 89: Fcc Information

    ## are the REN without a decimal point (e.g., 03 is a REN of 0.3). If this equipment Yap Jack Plus YJP-01 causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service...
  • Page 90 If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this Yap Jack Plus YJP-01 does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a...

  • Page 91: Part 15

    Yap Jack Plus User’s Guide – Chapter 9 Part 15 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential environment.
  • Page 92 Yap Jack Plus User’s Guide – Chapter 9...

  • Page 93: Index

    Yap Jack Plus User’s Guide – Index Index Accept Call, 7, 36 Connection Time, 6, 39 Account Contact Info, 7 Entering Account Information, Contact Information Menu, 65 15, 42 Navigating, 66 Funds Left, 26, 85 Cordless Phone, 86 Time Left, 26...
  • Page 94 Yap Jack Plus User’s Guide – Index Navigating, 45 Prefix Language, 3, 5, 39 Dialing, 3, 44, 73, 85 Changing the Display Requirements Language, 70 System and Service, 8 Masked Dialing, 3, 57, 58, 74 Self Test, 7, 36 Menu...

Table of Contents