Table of Contents
Advertisement
5.
Use the down (?) button to select N2P or the up
(?) button to select RTP.
6.
To save your entry, press the OK button.
Changing the Frames per Packet
Setting
If users encounter poor call quality because of bandwidth
issues, the frames per packet setting can be changed to 1,
2 or 3. The default setting is 2. 1 can be used when the
connection is good, 3 when the connection is poor.
To change the frames per packet setting:
1.
When Yap Jack Plus * Ready * is
displayed on the LCD, press the Menu/Exit
button.
2.
Using the down (?) button, move to the
>Advanced Setup menu option, and press the
OK button.
3.
Using the down (?) button, move to the
>Device Setup menu option, and press the OK
button.
4.
Using the down (?) button, move to the
>Frames Per Pkt menu option, and press the
OK button.
The Frames Per Pkt selection field displays.
5.
Using the down (?) and up (?) buttons, select
the desired setting from the available options: 1,
2, or 3.
6.
To save your entry, press the OK button.
Getting Product Information
The Information feature provides the following information:
?? Firmware version number
?? Hardware serial number
This information is especially helpful when troubleshooting
product problems.
To view the firmware version:
Yap Jack Plus User's Guide – Chapter 5
67
Advertisement
Table of Contents
