Table of Contents
Advertisement
Yap Jack Plus User's Guide – Chapter 5
To view the hardware serial number:
Testing your ISP Connection
Although not required, it is recommended that you have
the Yap Jack Plus test the ISP connection before you
place your first call.
To test your ISP connection:
1.
When Yap Jack Plus * Ready * is
dis played on the LCD, press the Menu/Exit
button.
2.
Using the down (?) button, move to the
>Information menu option, and then select it
by pressing the OK button.
3.
Select the >FW Version menu option by
pressing the OK button.
The firmware version number displays.
4.
To exit out of this field, press Menu/Exit.
1.
When Yap Jack Plus * Ready * is
displayed on the LCD, press the Menu/Exit
button.
2.
Using the down (?) button, move to the
>Information menu option, and then select it
by pressing the OK button.
3.
Press the down (?) button to move to the
>Serial Number menu option, and then select
it by pressing the OK button.
The hardware's serial number displays.
4.
To exit out of this field, press Menu/Exit.
1.
When Yap Jack Plus * Ready * is
displayed on the LCD, press the Menu/Exit
button.
2.
Using the down (?) button, move to the >Self
Test menu option, and then select it by pressing
the OK button.
The device will attempt to connect to your ISP
access telephone number.
If the connection is successful, Test
Successful displays on the LCD. If the
connection is not successful, the device tries to
68
Advertisement
Table of Contents
