Jumper List - Winmate ID31 User Manual

USER MANUAL

2.3.1 Jumper List

The following tables list the function of each of the board's jumpers.
Label Function
JP1 Clear CMOS
JP3
LVDS VOLTAGE
JP4 RS232 / RS422 / RS485 Selector
JP5 PWM /DC Selector
JP8 RS232 / RS422 / RS485 Selector
JP9 Inverter Power Selector
JP10 Inverter PWM Level Selector
JP11 Brightness Mode Selector
2.3.1.1 JP1: Clear CMOS
Remember to set jumper back to Normal before turning on the power supply.
CAUTION
TURN OFF the power supply before setting Clear CMOS.
ID31 MOTHERBOARD
CHAPTER 2
Note
3x1 header , pitch 2.0mm
2x3 header , pitch 2.0mm
2x3 header , pitch 2.0mm
3x1 header , pitch 2.0mm
3x4 header , pitch 2.0mm
3x1 header , pitch 2.0mm
3x1 header , pitch 2.0mm
3x1 header , pitch 2.0mm
Pin №
1-2
2-3 (Default)
HARDWARE INSTALLATION
Function
Clear CMOS
Normal
14