Table of Contents
Advertisement
USER MANUAL
VGA Support
USB Support
PS2 Device
Support
Network Stack
Driver Support
Gate A20 Active
Option ROM
Messages
ID31 MOTHERBOARD
CHAPTER 4
Configures VGA Support
settings
Configures USB Support
settings
Configures PS2 Device
Support settings
Configures Network
Stack Driver Support
settings
Configures Gate A20
Active settings
Set display mode for
Option ROM
Auto
Only install Legacy
OpRom with
Legacy OS and
EFI Driver
logo would NOT
be shown during
post. Efi driver will
still be installed
with EFi OS.
Disabled
All USB devices
will NOT be
available until
after OS boot
Full Initial
All USB devices
will be available in
OS and POST
Partial Initial
Specific USB
port/device will
not be available
before OS boot
Enable/
If Disabled, PS2
Disable
devices will be
skipped
Enable/
If Disabled,
Disable
NetWork Stack
Driver will be
skipped
Upon
GA20 can be
Request
disabled using
BIOS services
Always
Do not allow
Active
disabling GA20;
this option is
useful when any
RT code is
executed above
1MB
Force BIOS/
Set display mode
Keep Current
for Option ROM
AMI BIOS SETUP
73
Advertisement
Table of Contents
