Installing The Chassis Intrusion Switch - Dell PowerEdge T30 Owner's Manual

Figure 14. Removing the chassis intrusion switch
Next steps
1 Install the chassis intrusion switch.
2 Follow the procedure listed in the After working inside your system section.
Related links
Safety instructions
Before working inside your system

Installing the chassis intrusion switch

After working inside your system
Installing the chassis intrusion switch
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple
repairs as authorized in your product documentation, or as directed by the online or telephone service and support team.
Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
1 Follow the safety guidelines listed in the Safety instructions section.
2 Follow the procedure listed in the Before working inside your system section.
Steps
1 Insert the chassis intrusion switch into the chassis intrusion switch slot and slide it to secure it.
2 Connect the chassis intrusion switch cable to the system board.
48 Installing and removing system components