Dell PowerEdge T30 Owner's Manual page 27

Option
Drives
SMART Reporting
USB Configuration
Front USB Configuration
Rear USB Configuration
USB PowerShare
Miscellaneous devices
Table 24. Video
Option
Primary Display
Description
• Disabled
• AHCI
• RAID On
By default, the RAID On option is selected.
Allows you to configure the SATA drives on the system board. The available options are:
• SATA-0
• SATA-1
• SATA-2
• SATA-3
By default, all SATA drives are selected.
Specifies the hard-drive errors for the integrated drives that are reported during system startup.
This technology is part of the SMART (Self Monitoring Analysis and Reporting Technology)
specification.
SMART Reporting is set to Enable SMART Reporting. By default, this option is disabled.
Allows you to enable or disable the USB port configuration. The available options are:
• Enable Boot Support
• Enable Front USB Ports
• Enable rear USB Ports
Allows you to enable or disable the front USB ports. The available options are:
• Front Port 1
• Front Port 2
• Front Port 3
• Front Port 4
Allows you to enable or disable the rear USB ports. The available options are:
• Rear Port 1
• Rear Port 2
• Rear Port 3
• Rear Port 4
• Rear Port 5
• Rear Port 6
Allows you to enable or disable USB PowerShare.
USB PowerShare is set to Enable USB PowerShare. By default, this option is disabled.
Allows you to enable or disable various devices on the system board.
Miscellaneous devices is set to Enable PCI Slot. By default, this option is enabled.
Description
Allows you to configure primary video controller when there are multiple controllers available. The
available options are:
• Auto
System Setup 27