Installing The Bezel - Dell PowerEdge T30 Owner's Manual

Figure 9. Removing the bezel
Next steps
1 Install the bezel.
2 Follow the procedure listed in the After working inside your system section.
Related links
Safety instructions
Before working inside your system

Installing the bezel

After working inside your system
Installing the bezel
Prerequisites
1 Follow the safety guidelines listed in the Safety instructions section.
2 Follow the procedure listed in the Before working inside your system section.
Steps
1 Insert the bezel tabs into the bezel tab slots on the chassis.
2 Press the bezel into the chassis until the retention clips lock into place.
Installing and removing system components 43