Advertisement
Quick Start Guide
NOTICE
NOTICE
This guide provides basic guidelines for the Rosemount 4600 Oil & Gas Panel Pressure Transmitter. It
does not provide instructions for diagnostics, maintenance, service, troubleshooting,
explosion-proof, flameproof, or intrinsically safe (I.S.) installations. Refer to the Rosemount 4600
Reference Manual
EmersonProcess.com/Rosemount.
Explosions can result in death or serious injury.
Transmitters located in hazardous areas should be installed in accordance with local codes and
requirements for that area.
Use appropriately rated Ex adapters, blanking elements, and glands during installation.
Keep process insulation at least 1-in. [25 mm] from transmitter connection.
Electrical shock can result in death or serious injury.
Avoid contact with the leads and the terminals. High voltage that may be present on leads can
cause electrical shock.
Apply torque only to the hex flat located at the process end of the transmitter. Do not apply torque to
the transmitter body or electrical connection - severe damage could result. Do not exceed 100 ft-lbs.
Contents
Mount the transmitter
Connect the wiring and power
Configure the transmitter
2
for more instruction. This manual is also available electronically on
. . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . .
. . . . . . . . . . . . . . . . .
3
Trim the transmitter
3
Product Certifications
4
September 2016
. . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .
6
10
Advertisement
