Section 3 - Micro-Volume Settings; Accessing The Micro Volume Settings - jenway Genova Nano Operating Manual

SECTION 3 – MICRO-VOLUME SETTINGS
3.1

ACCESSING THE MICRO VOLUME SETTINGS

The micro volume icon is displayed in the bottom right hand corner of the screen in each
measurement mode.
The micro volume settings are accessed by pressing the key below the micro volume icon.
The micro volume settings allow the user to select the required path length (0.2mm or 0.5mm)
for a measurement and to calibrate the accessory using a standard solution with known
absorbance values at 260 and 330nm.
0.2mm Path Length
Setting
0.5mm Path Length
Setting
Auto Path Length
Setting
Path Length
Calibration
12
Fig 3.1 – Accessing the Micro Volume Settings Menu
Current Calibration
Factors
Fig 3.2 – Micro Volume Settings Menu
Micro Volume Icon
Tick icon
A
260
Standard Value
A
330
Standard Value
Calibration Standard
Path Length Value
Alignment Mode
Calibration
Calibration