Section 2 - Accessory Layout And Installation; Accessory Layout; Initialisation; Note: The Instrument Will Return To The Last Main Menu Used - jenway Genova Nano Operating Manual

SECTION 2 – ACCESSORY LAYOUT AND INSTALLATION
2.1

ACCESSORY LAYOUT

2.2

INITIALISATION

Connect the power supply unit to the power inlet socket on the rear panel of the instrument and
connect to the mains socket. Turn the power on at the mains and switch the instrument on using
the power switch on the rear of the instrument.
The instrument will initially check for firmware updates and then perform several power-on tests
before displaying the main menu:

Note: The instrument will return to the last main menu used.

Fig 2.2 – Genova Nano Main Menu
11