PICO840/842 Pico-ITX Board
3.5
AX93283 Connectors, Switches and LED
Signals go to other parts of the system through connectors. Loose or improper connection
might cause problems, please make sure all connectors are properly and firmly connected.
Here is a summary table which shows all connectors, switches and LED on the hardware.
Connector/Switch/LED
CN1
CN2
CN3
CN4
CN5
CN9
CN10
USB1~USB2
D1
3.5.1
System Reset Switch (CN1)
This switch reboots your computer without turning off the power supply. It is a better way
to reboot your system for a longer life of the system power supply.
Function
On
Off
3.5.2
Audio Jack (CN2)
This is audio jack with HD audio support. Install audio driver, and then attach audio
devices to CN2.
Pin Color
Green
Pink
26
Description
System Reset Switch
Audio Jack
COM1 Connector
COM2 Connector
System Power Switch
40-pin Board to Board Connector
20-pin Board to Board Connector
USB 2.0 Connectors
Power and HDD LED indicator
Description
Reset system
Keep system status
Signal
Line-out
MIC-in
AX93283 I/O Board
Need help?
Do you have a question about the PICO840 and is the answer not in the manual?