Table of Contents
Advertisement
Avoid accidental starting. Ensure the switch is in the off-position before connecting the
battery, storing or carrying the power tool. Carrying power tools with your finger on the switch
or plugging in power tools that have the switch on invites accidents.
Remove any adjusting tools or wrenches before turning the power tool on. An adjusting tool
or wrench left attached to a rotating part of the power tool may result in personal injury.
Do not overreach. Keep proper footing and balance at all times. This enables better control of
the power tool in unexpected situations.
Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves
away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts,.
If devices are provided for the connection of dust extraction and collection facilities, ensure
these are connected and properly used. Use of these devices can reduce dust-related
hazards.
Power tool use and maintenance
Do not force the power tool. Use only the correct power tool for your application. The correct
power tool will do the job better and safer at the rate for which it was designed.
Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot
be controlled with the switch is dangerous and must be repaired.
Unplug the power cord from the mains outlet before making any adjustments, changing
accessories, or storing power tools. Such preventative safety measures reduce the risk of
starting the power tool accidentally.
Store idle power tools out of the reach of children and do not allow persons unfamiliar with
the power tool or these instructions to operate the power tool. Power tools are dangerous in
the hands of untrained users.
Maintain power tools. Check for misalignment or binding of moving parts, pay particular
attention to cracks, breakage of parts and any other condition that may affect the power tool's
operation. If damaged, have the power tool repaired before use. Many accidents are caused
by poorly maintained power tools.
Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to control.
Use the power tool, accessories and tool bits etc., in accordance with these instructions and
in the manner intended for the particular type of power tool, taking into account the given
working conditions and the work to be performed. Use of the power tool for operations other
than those for which the power tool is intended could result in hazardous situations.
Service
Have your power tool serviced by a qualified repair person using only original replacement
parts. This will ensure that the safety of the power tool is maintained.
POLE-MOUNTED PRUNER
Safety instructions
19
OPERATING INSTRUCTIONS
EN
Advertisement
Table of Contents
