Table 2-1 Operating Limits And Condensed Specifications - Honeywell DR4500A Product Manual

Installation - Overview
Operating limits and condensed specifications
We recommend that you review and adhere to the operating limits listed in Table 2-1 when you install your
recorder.
Condition
Ambient Temperature
Relative Humidity
Vibration
Frequency
Acceleration
Mechanical Shock
Acceleration
Duration
Power
Power Consumption
Digital Indication
Accuracy
Minimum Input Span
Input Impedance
Source Impedance
Span Step Response
Time
Sampling Rate
Input Filter
Digital Displays
Indicators
Deviation Bargraph
Controller Modes of
Operation
8 DR4500A Classic Series Circular Chart Recorder With or Without Control Product Manual

Table 2-1 Operating limits and condensed specifications

32 to 131°F (0 to 55°C)
5 to 90% RH at 40°C (104°F)
0 to 200 Hz
0.2g
5g
30 ms
102 to 132 Vac 50/60 Hz
204 to 264 Vac 50/60 Hz
20 watts maximum
1 digit
Range is fully configurable with span limitation of the operating range selected.
4-20 mA dc: 250 ohms
0-10 Vdc: 200K ohms
All others: 10 Megohms
RTD: 100 ohms per lead maximum
6 seconds maximum with no filtering
Each input sampled 3 times a second
Software: Single pole low pass section with selectable time constants (off to 120
seconds).
Vacuum fluorescent, alphanumeric.
A six digit display dedicated to the process variable.
Alternate information displayed during configuration mode.
An eight digit display shows key selected operating parameters. Also provides
guidance during configuration.
Channel PV display (CHN 1 or 2)
Alarm status (ALM 1, 2)
Controller Output (OUT 1, 2)
Remote Setpoint (RSP)
Temperature unit (F or C) or Engineering Units
Controller's mode (A or MAN)
21 segment, color coded deviation bargraph:
Green (large) = On Control
Green (small) = Deviation to ±10% of PV
Manual Operation
Automatic with local setpoint
Automatic with remote setpoint
Specifications
Release M
April 2017